About NPS-Q45T
What Is NPS-Q45T?
NPS-Q45T is not just a contact enhancer, it is a uniquely designed new technology that works to aid the electromagnetic signal to lower noise and distortion by helping it move more freely though mechanical contacts. It also protects your connections from corrosion and improves signal integrity dramatically in any application.
Most contact enhancers are made to either protect against corrosion, using dielectric grease or partly conductive florocarbons while others increase the presence of electrons using silver, gold or carbon (graphene) particles, the neatest version using nano-materials to boost conductivity or combinations of the two. These products offer very good simple solutions and most modern products are well thought through. They are also the most economical solution for companies and individuals trying to find some improvment or protection while on a budget for the project or do not require critical applications.
NPS-Q45T is uniquely different from these products as it is designed to manipulate the magnetic field to aid in the transfer of the actual electron magnetic signal. Dramatically increasing the signals integrity all while providing long term protection. Everything in NPS-Q45T was tested, tried, researched and well thought out from the base ingredients that offer protection from corrosion to advanced magnetic materials and the top nano-particles such as graphene nano-tubes, silver nano particles and various other materials. NPS-Q45T is a myriad of technology with the key ingredient materials chosen to assist in field direction and signal transmission support, helping create a new breed of contact support that opens new possibilies to reduce signal loss at connections. In short, it is true innovation!
Where should I apply NPS-Q45T?
Honestly, the options are endless. Any and every connection can show great improvement. Although originally designed for the Audio industry it has proven to show diversity among many industries.
Audio
Video (TV and Theater)
Automotive and Motor Sports
Oil field
Electronic Assemblies
Power Conditioning
Appliances
Solar Energy Systems
Battery Terminals
Antennas
Clip Terminals
Fuses
Sockets and panel connections including electron tubes contact pins
Coils, motors, alternators, compressors, electrical panels, clip lead breakers, spark plug leads, bulbs, ECU’s, O2 censors and maps, outlets, computers, Basically anywhere that you have a mechanically based electronic connection AC or DC.
NPS-Q45T has a non-toxic base that greatly reduces any chance of oxidization which can commonly cause connectors to fail.
How do I apply NPS-Q45T?
Start with a fresh slate, before treating wipe off any existing contact enhancers or dielectric grease, aerosol alcohol works great for this. Use a light layer, brushed onto the first 1/3 to 1/2 of the male connection for easiest application. May be applied to a bare wire before inserting coating the entire exposed wire then terminating. Apply to Power Cables RCA or XLR male blades. Female connections can also be coated if done carefully with the correct applicator, however treating only your male ends is perfectly sufficient as it will transfer upon connection.
Sample videos will follow.
Take care in application as to not cause shorts or unwanted resistance from excess material being applied and crossing dielectric boundaries intended in many connections. Remember if you are concerned with the application process you can seek help from a learned professional. Avoid forums as these can lead to much misinformation mixed with good advice and be hard to understand what is right to do and who is getting it all wrong.
The product does not dry and has indefinite shelf life. When contact enhancers dry they lose conductivity support and are hard to remove and may damage your connectors if taken apart. They also do not conduct after the dried connection is broken and may damage the contact permanently. The product should be applied in a thin layer of paste and not removed or wiped off before application as that negates the purpose of application. Products that need to be wiped off are not meant for long term prefomance and often degrade almost as soon as you apply them as they evaporate or oxidize quickly.
Cautions:
NPS-Q45T is very conductive and should be applied with care. Due to the tiny nano particles used, gloves are recommended with use. Avoid contact with eyes face and skin and do not swallow. It is safe with most plastics and metals, If unsure please test before use.
Contains no harsh chemicals or alcohol.
When should I re-apply NPS-Q45T?
NPS-Q45T is a permanent solution which does not require re-treatment, it is long lasting adding years of life to connections. However if you are often plugging in and pulling out your connections go ahead and re-treat if/when you feel it appropriate.