ABOUT NPS-PRO and NPS-PRO Interconnect

NPS-PRO is made of non-toxic material designed to enhance the transfer of electro magnetic fields. It functions in temperature ranges from -45F to 450F while keeping its original form. NPS-PRO does not dry. This product is not a cleaning solution, it is a contact enhancer. Apply a small amount of NPS about halfway down the connector from the tip towards the base. Insert the cable immediately after application, lining up connections before inserting. You should hear immediate effects to your system with full break-in occurring in approximately 1 week with about 8 hours of playtime per day. No break-in will occur without system playing as it requires electromagnetic signal to be traveling through connections in order to stabilize. NPS-PRO can be applied to ground. Do not use on optical cables. On female connections, use an applicator to insert the product. Before applying NPS clean the connectors thoroughly, making sure to remove any other contact cleaners or other forms of NPS. Use supplied brushes and cloth as well as 99.99% electronics cleaning alcohol. An aerosol version can be handy for spraying inside connectors to get the best deep clean. Avoid contact between alcohol and rubber o-rings as it will dry out and weaken the rubber. Do not mix NPS with any other contact enhancer or cleaning solution. Apply a thin but visible layer of NPS, ensuring it is not dripping from the connector.

NPS-PRO is designed for Power, Speaker, Fuses and other high current carrying conductors.

NPS-PRO Interconnect is designed for interconnects such as ethernet, HDMI, USB, RCA, XLR, SPDIF, AES3, any analog or digital interconnect or connection. It is excellent for analog cartridges on phono rigs.